Single Output Soldering & Rework System – Tip Hand-Piece
MFR-1160
Description
The MFR-1100 Single Output Series is highly versatile in that it can be used with either a soldering tip, cartridge or tweezers and offers a choice of four hand-pieces. The MFR-1160 comes with a Cartridge Hand-piece especially designed for Metcal SSC cartridges. This system will allow users of the Metcal SP200 Soldering System to continue to use their Metcal SSC cartridges.
Technical Specification
Power Supply
| Ambient Operating Temperature: | 10 – 40°C (50°F – 104°F) |
| Maximum Enclosure Temperature: | 55°C (131°F) |
| Input Line Voltage: | 100 – 240 VAC |
| Input Line Frequency: | 50/60 Hz grounded circuit |
| Power Consumption: | 65 Watts maximum |
| Output Power: | 60 Watts maximum |
| Output Frequency: | 450 KHz |
| Power Cord: | (3-wire) 183 cm 18/3 SJT |
| Dimensions (approx.) W x D x H: | 90mm (3.5”) x 200mm (8”) x 152.5mm (6”) |
| Weight: | 2.3kg (5.05 lbs) |
| Surface Resistivity: | 105-109 Ohms |
| Certification / Marking: | cTUVus, CE |
| Hand-piece Cable Length: | L=122cm (48″), burn resistant, ESD safe |
Handle and Workstand:
| Tip-to-Ground Potential: | < 2 mV RMS |
| Tip-to-Ground Resistance: | < 2 ohms |
| Idle Temperature Repeatability: | +/- 1.1°C (2°F) in still air |
Handle Cord Assembly Length: | 122cm – burn proof, ESD safe |
| Connector 8-pin circular DIN | |
| Workstand W x D x H: | 100mm x 200mm x 100mm (4″ x 8″ x 4″) |
| Workstand Weight: | 0.69 kg (1.51 lbs) |
