- Manual pneumatic machine to cut & form radial taped components. The upper movable die is controlled by the vertical stroke of the cylinder. The same die will form a variety of lead pitches without the need of any adjustments. There are 10 standard interchangeable dies available. Special dies can be made to modify the specs of a standard form, or a new form can be developed from a drawing upon request.
- Motorized cutting machine for loose radial components. Adjustable speed. Easy and quick manual component feeding. Two belts hold the leads and feed them through the rotary blades. The cutting length can be adjusted by turning an allen screw located on the right from guide. TAPE PITCH The attachment BR3 can be added to the TP/TC4 to handle taped radial components. It is available for two types of tape hole pitch: 12.7mm (.5") or 15mm (.59").
- The TP/LN-500 is a pneumatic machine to cut loose radial components by using a guillotine type lower blade. It can handle any type of radial component regardless of lead diameter, pitch and form. The upper plate thickness comes at a standard .125" (3.2mm) Additional plates can be ordered to increase the height, starting from .019" (0.5mm).
- The TP/LN-500 is a pneumatic machine to cut loose radial components. The upper stationary plate determines de cutting height, the standard is .125" (3.2mm). Additional plates to increase this height are available starting from .019" (0.5mm) The cutting area is 1.77x2.12" (45x54mm). Lateral cuts at the most common pitches allow the easy handling of bent leads. The standard grid pattern accommodates most types of components. Special grid pattern plates can be provided upon request.
- The TP/TO-CF is an automatic machine designed to cut and form transistors in a tube (TO-220, TO-218, TO-126). All operations are controlled by a PLC. The complete process is fully automated. Each type of transistor requires a dedicated die. Two wire holders lock the leads before the cutting and forming operation. The productivity of the TP/TO-CF is approximately 2,500 parts per hour.
- The OLAMEF MOT 98 (7915030) is a motor drive unit that attaches to the TP6, TP6/PR-B, TP6/V, TP6/S, TP6/R manual machines. This accessory can be purchased separately or as part of the equipment. A foot pedal to control the motor is available (600023). The motors are NECESSARY when planning to use a Loose Component Feeder.
- The SEP2 is a manual machine designed to separate pre-scored PCBs fast and economically. The clearance between the circular blade and the linear blade is adjustable depending the PCB thickness to ensure that the PCB is only separated in the pre-scored groove. The height of the front and back supporting tables is also adjustable. During the operation, the PCB is placed with its pre-scored groove onto the linear blade and the circular blade is then drawn by hand across the PCB.
