- Manual machine to cut radial taped components. It is available for two types of tape hole pitch: 12.7mm (.5") or 15mm (.59") The TP6/R can be adjusted easily for different lead lengths. If you need an economical machine, see the TP6/R-EC also available in the the two tape pitch versions.
- Cut, bend and form machine for axial components. Three versions are available depending on the lead diameter of the components: 1. TP6/PR-F/1 - .019-.035 " (0.5-0.9mm) 2. TP6/PR-F/2 - .031-.039 " (0.8-1mm) 3. TP6/PR-F/3 - .039-.051 " (1-1.3mm) Various dies are available for each version. The TNS is always supplied with this machine.
- Cut and bend machine for axial components. The standard version is designed for leads with lead diameters from .015 - .051" (0.4-1.3mm) Other versions available for reduced bend from body, fixed pitches (.2", .3", .4" or 5.08mm, 7.62mm, 10.16mm) and for heavy leads (up to .055" or 1.4mm)
- The TP/TO-CF is an automatic machine designed to cut and form transistors in a tube (TO-220, TO-218, TO-126). All operations are controlled by a PLC. The complete process is fully automated. Each type of transistor requires a dedicated die. Two wire holders lock the leads before the cutting and forming operation. The productivity of the TP/TO-CF is approximately 2,500 parts per hour.
- Motorized cutting machine for loose radial components. Adjustable speed. Easy and quick manual component feeding. Two belts hold the leads and feed them through the rotary blades. The cutting length can be adjusted by turning an allen screw located on the right from guide. TAPE PITCH The attachment BR3 can be added to the TP/TC4 to handle taped radial components. It is available for two types of tape hole pitch: 12.7mm (.5") or 15mm (.59").
- The TP/LN-500 is a pneumatic machine to cut loose radial components by using a guillotine type lower blade. It can handle any type of radial component regardless of lead diameter, pitch and form. The upper plate thickness comes at a standard .125" (3.2mm) Additional plates can be ordered to increase the height, starting from .019" (0.5mm).
- The TP/LN-500 is a pneumatic machine to cut loose radial components. The upper stationary plate determines de cutting height, the standard is .125" (3.2mm). Additional plates to increase this height are available starting from .019" (0.5mm) The cutting area is 1.77x2.12" (45x54mm). Lateral cuts at the most common pitches allow the easy handling of bent leads. The standard grid pattern accommodates most types of components. Special grid pattern plates can be provided upon request.
