TSM120FR

2-Component Mix and Dispense Systems

Description

The TSM50FR and TSM120FR are fixed ratio metering, mixing and dispensing machines are pneumatically powered and digitally controlled utilizing PLC, HMI touch screen technology enabling a wide range of electrical accessories and easy robot interface.

These meter mix systems employ a parallel drive system with positive displacement pump technology to ensures repeatable, accurate volumetric metering, mixing and dispensing of low to medium viscosity two-part resin systems.

These compact machines are simplistic in its format and flexible in its design to accommodate a range of optional extras to suit the wide range of available resins and differing customer application needs.

The TSM50FR is capable of dispensing (depending on ratio) mixed material from 2 to 50cc. The TSM120FR will dispense from 5 to 120cc to within +/- 1% volumetric accuracy. The TSM50FR is a low cost investment and an economical solution to what is often inefficient and hazardous process.

These mix and dispense systems can be used in bonding, encapsulation, potting, sealing and insulating applications for all industries.

Typical Application:
-Bonding
-Encapsulation and Potting
-Sealing
-Insulating

Key Features:
-Volumetric metering and mixing
-Accurate and repeatable up to ± 1%
-Fix ratio from 1:1 to 10:1
-PLC, HMI touch screen
-Adjustable shot size

 

Technical Specifications

Equipment Standard Features Optional Features
Tanks
10 L SS tank with clamped, sealed lid and moisture trap Low level sensor with visual and audible alarm
5 L SS tank with clamped, sealed lid and moisture trap Tank stirrer electric, control on HMI
3 L SS tank with clamped, sealed lid and moisture trap Tank stirrer pneumatic
7L polyethylene reservoir Tank heater with built in thermostat and power cable. Off/On via HMI
Metering Pumps
Part ‘A’ pump is EN40 anti-abrasive pump tube and glass filled nylon piston.
Part B pump EN40 anti-abrasive pump tube and glass filled nylon piston
Part ‘B’ pump 303 stainless steel pump tube
Mixing Head
1/4BSP stainless steel 4/4 or 4/2 port machine mounted
Hand held, trigger operated
5/3 or 5/3/5/ ported
Ratio check blocks
Seal cap
Hoses
Standard length x 1/8 or ¼ or 3/8 or ½ inch bore PTFE lined stainless steel braided, m/s end fittings, from pump to machine mounted mixer
1/8 or ¼ or 3/8 or ½ inch bore PTFE lined m/s SS end fittings 2 or 3 meters long
Heated and temperature controlled hose
Machine Control
PLC, HMI touch screen Kinecheck shot speed control
Full Shot / Operator control Re-circulation after NRV back to reservoir
Stalled shot, pumps inch down the pump tube against closed mixer Service kit for pump and mixing head
LSA shot size control, limit switch on movable lead-screw Foot pedal actuation Hand held trigger actuated if hand held
Anti – gel timer on HMI Shot counter repeater on HMI I/O integration

 

 

Specifications TS50FR TSM120FR
Mix Ratio Options 1:1, 2:1, 4:1 1:1, 2:1, 4:1, 10:1
Shot Size Range 2 – 50 Cc 5 – 120 Cc
Maximum Viscosity 150,000 Cps. (Self-Level) 150,000 Cps. (Self-Level)
Activation Foot Switch & Plc Foot Switch & Plc
Metering Repeatability +/- 1% +/- 1%
Operating Pressure +/- 1% 100 psi
Mixing Disposable Static Mixers Disposable Static Mixers
Tank Capacity Options 3, 5, 7, 10 Liter 3, 5, 7, 10 Liter
Mechanism Parallel Drive, Positive Displacement Parallel Drive, Positive Displacement
Control Panel Digital, Hmi Touch Screen Digital, Hmi Touch Screen
Power (Digital) Single Phase 110V & 220V Single Phase 110V & 220V
Dimension (W X D X H) 30.5″ X 16.9″ X 22.4″ (775 X 430 X 570 Mm) 30.5″ X 16.9″ X 22.4″ (775 X 430 X 570 Mm)
Weight 88 Lbs (40 Kg) 110 Lbs. (50Kg)